At the touch of a button
Automatic control
Why manually operate your pool equipment when you can automate it? A control system takes the work out of your hands, leaving you with more time to relax by your pool. A Roldeck® automatic slatted cover comes standard with a control system for its operation. With the control panel, the S-switch, you can operate the Roldeck® with a single press of a button. The pool cover opens or closes with a smooth, silent motion.
Automatic Control
How does a Roldeck® work?
A Roldeck® pool cover consists of insulating, interlocked slats that float on the water. These slats then roll up and down around a stainless steel shaft when opening and closing. The drive mechanism stops automatically once the cover is fully open or closed, but you can also stop it at any point in between. This rolling system can be finished in many different ways, either above ground or underground. You can choose between an external or tube motor. With the control system, you can easily and automatically open and close the Roldeck®. The included remote control makes life even easier.
Remote Control
The remote control offers easy management of the following devices: Roldeck® cover, underwater lighting, jetstream, garden lighting. Enjoy a wide range, long battery life, and full compatibility with any S-Switch model.
S-Switch
The S-Switch can be installed either in a wall socket or mounted on the surface with the included fixture. The S-Switch features an advanced fault code diagnostic system and automatically locks after 15 minutes. Available in black and white.
Control Panel RD2013
RD2013 is a modular plug-and-play control system with automatic motor recognition and optimizes the control program for tube and external motors. Features include soft start/stop, connections for child safety lock, garden, and LED lighting.
Easy to Use
A Versatile System
The S-Switch's illuminated display shows key information such as the status of the Roldeck®, lighting, and optionally, water temperature. The updated Roldeck® control system can operate not only the pool cover but also other devices in and around the pool, including:
- Automatic motor recognition and selection of the optimal control program for tube and external motors
- Soft start and soft stop when operating the cover
- Output for garden lighting/accessories and underwater lighting (LED lighting)
- Connection for child safety lock
- Delayed on/off for the filter pump and jetstream, if desired
- Advanced fault code diagnostic system for easier fault detection
- Connection for pressure measurement (for tube motors)
- Emergency stop
Advanced Roldeck Motors
Smooth and Silent
A Tube Motor is Built into the Roll-Up Shaft The Roldeck® tube motor is the solution for new pools, renovations, and/or covers to be installed later, especially where high groundwater levels may cause problems. The nitrogen-filled drive motor is housed in a waterproof casing in the roll-up shaft. A built-in pressure sensor continuously monitors the pressure of the nitrogen filling in the tube motor, which comes standard with a 10-meter cable (25-meter cable available upon request). The tube motor’s cable can be concealed in four different ways: Through the wall using a wall conduit at the shaft level. Along the wall using a cable tray inside the pool. Inside the wall using a cable tray in the formwork. Along the wall using the hanging plate system (via a cable tray inside the pool).
Need more comfort?
Want to take the comfort and ease of use of your pool to the next level? Request a free quote now or find a Roldeck® specialist in your area.